Sequencer
The sequencer excists as a 3 part machine, with all their specialties:
- Settings: Control the length and speed of the sequence
- Sequencer Bar: Status of position and quick edit functionality
- Sequencer Grid: In place control of all channels over 16 steps
Settings

- BPM
- Display with the curent BPM (Beats Per Minute)
- Controlls
-
- The ■ Button stops the sequence and sets the position back to the start.
- The ► Button starts or stops the sequence. The position stays where it is.
- Drumkit
- Select a drumkit. Currentlu you can select between:
- TR808: a legend by Roland
- TR909: another legend by Roland
- HR16: a real late eighties drumcomputer
- Linndrum: a real early eighties drumcomputer
- Tempo
- Set the speed of the sequence, from a balad to real hardcore
- Length
-
- Set the length of the sequence by steps of 16 with the arrow buttons
- The green led shows the length of the sequence, the white one the 16 steps playing new. If thew both are on the same position it turns blue
- With the ↺ button you can loop the current step of 16
- Edit
- Select the group of 16 you want to edit. Because there is only a row of 16, you need to select which group. The activated steps are colored yellow
Sequencer Bar

- The bar
- The bar can be used for setting sounds on possitions. You can use this single bar for all sounds.
- How to set
-
- Select the group you want to edit: [1-16], [17-32], [33-48], [49-64]
- Select one of the sounds/channels
- Click on the step to turn them on and off
- Yellow is selected, green is the current position of the sequence
Sequencer Grid

- Toggle grid
- The marked button toggles the grid
- The grid
- The grid can be used for setting sounds on possitions. in contrast to the bar you can set every sound/channel in one view
- How to set
-
- Select the group you want to edit: [1-16], [17-32], [33-48], [49-64]
- Click on the step of teh sound/channel to turn it on and off
- Yellow is selected, green is the current position of the sequence